When you’re not giving your car regular washes and waxing, it can end up looking old and run down quite quickly. But that’s not the only thing that can make your vehicle deteriorate over time. You’ll need to find a high-quality service of car detailing in Canberra to keep your vehicle in good condition.
Remove contaminants by using a clay bar.
Clay bars are often used to remove contaminants such as dirt, bird droppings, tree sap and industrial fallout accumulated on the car. The clay bar removes the contaminants without damaging or scratching the clear coat.
Use pH-neutral shampoo for car washing.
Gold Class Car Wash Shampoo and Chemical Guys Car Shampoo are the two most popular car washes. However, if you want the best results and have time to devote to the process, use a foam cannon or a foam gun for even better car guidance.
Buff with a soft microfiber sponge.
Using a sponge is the best way to eliminate scratches and swirls. The soft material will protect the paint while drawing the polish into all corners of your vehicle.
Use an orbital buffer with a foam pad to finish off the job.
An orbital buffer is your best bet if you’re looking for a super glossy shine. These machines use high-speed spinning discs that can apply lots of force on paint in short periods – but only if you know how to use them properly!
Paint sealant or ceramic coating?
Paint sealants protect a factory paint job from oxidation, fading and dirt. They’re typically applied by hand with an orbital buffer or dual-action polisher. The process takes about 30 minutes per panel, depending on how many panels you have.
Ceramic coatings are a heavier-duty layer of protection and are meant to last up to five years. They protect against scratches, swirl marks, and other imperfections in the clear coat layer of your vehicle’s paint job. In addition, ceramic coatings are durable and can be applied by hand or with automated applicators. This means that they’re easier than traditional waxes or paint sealants to remove from your car without damaging it. They’re also more durable than other paint coatings on the market.
Apply wax layer by layer.
After drying your car with a chamois, apply a coat of wax. Allow it to dry for 20-30 minutes before buffing off the excess with a clean microfiber towel. Repeat for maximum efficiency. But you might want to consider doing this if you live in an area where temperatures are below freezing most of the winter or if you’re going on vacation at some point during warmer months.
Polish your tires, too.
Polish with a machine polisher after claying your vehicle. Machine polishers provide a higher level of precision, which means you can better control the pressure applied to the paint. Swirls or scratches won’t be an issue for your vehicle after you’ve used one of these for polishing.
Avoid DIY detailing mistakes.
Do not use abrasive material on the paint of your car. This could have damaging effects and make the colour of the paint appear duller.
Cleaning agents are usually made specifically for different parts of a car. For example, glass surfaces and vinyl decals should be cleaned with soap and water, while leather panels require a wax remover.
If you are looking for the perfect gloss finish, or want to know what it takes to get one on your car, just follow these 10 quick and easy methods. Many people don’t realise how straightforward car detailing in Canberra can be. In addition, most methods are not costly and only require a little time investment.
